LG PuriCare™ Self-Service Tankless Water Purifier with 4-Stage Filtration│Hot / Cold / Ambient (White)

 1. Press and hold the Outlet Sterilize button at the top of the purifier for 3 seconds.

2. Place a container with a capacity of 300ml or greater below the water outlet.

3. When the container larger than 300ml has been prepared and placed, press the Dispense Water button. The sterilization process will take about 10 minutes. Hot water will be dispensed about 7 minutes later. Please ensure that this is inaccessible by children.

4. Once the sterilization of the water outlet is complete, please discard the hot water dispensed into the container.

The water pipes for hot, ambient and cold water will be automatically sterilized with heat once per week. Once every 4 weeks, the cold water tank pipes will be included in the sterilization process, which will take about 30 minutes.

The water pipe will be automatically sterilized once per week, and on-demand sterilization can be performed manually.

To sterilize the water pipe, press and hold the Internal Sterilize button at the top of the purifier for 3 seconds. The scope of high temperature sterilization is limited to from filter to the pipe that runs from the filter to the water outlet.

 Changing through ThinQ app

1. In the LG ThinQ App, press the water purifier icon.

2. Select the '>' icon in the High Temperature Sterilization window, or select 'Schedule high temperature water pipe sterilization' under Settings.

3. In Schedule Sterilization, press the '>' button.

4. Set the desired schedule time and press the Save button.

 If the valve where the source water is supplied or the dispense valve of the faucet is closed, the water pipe sterilization and water outlet sterilization features will not work. Please open the source water valve or the dispense valve. 

 1. Pull out the draining tray to remove it from the product.

2. Push the moving tap to the end of left or right and open the filter cover.

3. Grab the filter and lift it 90 degrees, and then turn it counterclockwise to separate it.

4. Insert the filter and turn it clockwise.

5. Place the filter cover on again. The filter cleaning process takes about 7 minutes.

6 When the filter cleaning is complete, press and hold the Cold Water button for more than 3 seconds to reset the filter usage count.

 If you close the source water valve during filter replacement, the filter cleaning will not work as the source water will not be supplied.

Do not close the source water valve, and leave it open while changing the filter. Close the filter cover to proceed with the filter cleaning process.

 1. In the LG ThinQ App, press the water purifier icon.

2. Press the 'ⓘ' icon at the top-right corner of the screen, and press the Settings window.

3. In the Settings, select the product sound setting '>' icon.

4. When 'Use' is selected, the 'Button Sound' and 'Water Dispense Voice' can be set.

5. Select the '>' icon of Control Volume to adjust the volume.

 If the draining tray is rotated sideways during separation, the draining tray will not be locked.

Please separate the tray while facing the front of the purifier.

If the draining tray is separated while the it is rotated, check the joining section (locking hole) by sight and connect the draining tray in after rotating it sideways

 If you have separated the draining tray while the tray is rotated, the filter cover handle hole may also be rotated, preventing easy opening of the filter cover.

Please check the joining section (locking hole) of the draining tray before connecting the draining tray from the front. Separate it again and open the filter cover.